Ground Penetrating Radar
Ground Penetrating Radar
Basic Introduction to Ground Penetrating Radar (GPR)
The ground penetrating radar system works by sending a pulse of energy into a material such as concrete and recording the strength and the time required for the return of any reflected signal. A series of pulses over a single area make up what is called a scan. Reflections are produced whenever the energy pulse enters into a material with different electrical conduction properties or dielectric permittivity from the material it left. The strength of the reflection is determined by the contrast in the dielectric constants and conductivities of the two materials.
What is GPR?
Benefits of GPR:
- Non-destructive – Frequency waves make no damage on the subsurface, environment or surrounding people.
- Disturbance free – Makes little noise and doesn’t bother surrounding people.
- Easily deployed – Multiple size options that are user friendly, so it can be stored, moved and used almost anywhere.
- Rugged – Construction is durable and designed to endure the everyday riggers associated with its applications.
- Upgraded system – Similar to having a test trench or boring along the whole length of the project without digging.
- Eliminates Waste: Points out areas to test pit or sample bore.
What is GPR?
Benefits of GPR:
- Non-destructive – Frequency waves make no damage on the subsurface, environment or surrounding people.
- Disturbance free – Makes little noise and doesn’t bother surrounding people.
- Easily deployed – Multiple size options that are user friendly, so it can be stored, moved and used almost anywhere.
- Rugged – Construction is durable and designed to endure the everyday riggers associated with its applications.
- Upgraded system – Similar to having a test trench or boring along the whole length of the project without digging.
- Eliminates Waste: Points out areas to test pit or sample bore.
GPR Equipment
- A control unit
- An antenna
- Power supply
GPR method
The GPR energy pulse is reflected back to the antenna and energy also keeps traveling through the material until it either dissipates or the GPR control unit has closed its time window. The rate of signal attenuation varies widely and is dependent on the properties of the material through which the pulse is passing. These pulses are then recorded on a screen to form the differences in material.
Processing the GPR method
The GPR operator will note the location of a target so that it can be avoided; a process called utility locating or utility mapping. These situations will require the operator to use GSSI GPR processing software, which applies mathematical functions to the data in order to remove background interference, eliminate hyperbolas, and calculate accurate depth.
FAQ’s about GPR concrete scanning
Yes. GPR uses only 1% of a regular cell phone signal.
GPR systems work by sending a pulse of energy into a material via an antenna. A computer records the strength and time required for the return of any reflected signals. Subsurface variations will create reflections that are picked up by the system and stored on digital media.
Depending on a wide variety of factors such as ground density and consistency, GRP can locate objects up to 5ft underground.
GPR can be used to locate any object that has a different composition than its surrounding materials.
Yes. GPR can integrate with most GPS systems.
The GPR system is very accurate and can pinpoint exactly where an underground object is located.
